Argon NEO 5 M.2 NVMe PCIe Case for Raspberry Pi 5

S$31.79 - S$181.43
Cashback: S$0.95 - S$5.44
  • Case + NVMe Base + MakerDisk 512GB
  • Case + NVMe Base + MakerDisk 256GB
  • Case + NVMe Base + MakerDisk 128GB
  • Case + NVMe Base
  • Case Only
  • NVMe Base Only
Availability: 154

Buy locally from a partner


Note: NVMe 2280 M-Key MakerDisk SSD 512GB, 256GB, and 128GB shipped from 1st January 2024 onwards are loaded with the latest Raspberry Pi OS (64-bit) - Bookworm (release date: 5th December 2023). We have tested all capacities of MakerDisk NVMe 2242 with this case and Raspberry Pi 5, and they all work.


Note: The bootloader of Raspberry Pi 5 needs to be updated to Version: 30de0ba5 – 2024/01/5 to enable the NVMe driver and boot from it.  Please refer to this tutorial to update the bootloader of Raspberry Pi 5. Of course, you will need a microSD card to do that.


The new Argon NEO 5 is redesigned to meet the demanding needs of the Raspberry Pi 5. Given the Pi 5's powerful nature, it tends to generate noticeable heat, especially under heavy loads. To address this, the new Argon Neo case is equipped with a fan, ensuring optimal temperature control and eliminating concerns about overheating.


You can also check out the review of ETA Prime, he shows the installation of the Argon NEO 5 case and thermal performance with the Official Active cooler.



Additionally, the sliding top of the case provides a better solution to keep the ports safe when not in use. Also, once you open the top you have access to the GPIO pins of the Raspberry Pi, Display Port, Camera Port, etc.



To verify the cooling performance, we conducted a thermal stress test with the Raspberry Pi 5 8GB RAM inside the Argon Neo 5 Case, and it maintained a cool temperature below 75°C!



What's particularly special about this Argon Neo 5 case is its optional M.2 NVMe base, perfect for makers looking to elevate their Raspberry Pi 5 experience with a MakerDisk SSD. The NVMe base connects to your Raspberry Pi 5 via the PCIe connector, allowing you to utilize M.2 NVMe storage for media, games, and more. You can boot your Raspberry Pi 5 from fast NVMe storage or use it alongside a MicroSD card OS for storage purposes. 


Note: You will need to use an official 27W Raspberry Pi power supply with this case to ensure sufficient power for the Raspberry Pi, case, and NVMe base.



PCIe Speed Test (using Raspberry Pi 5 8GB RAM & NVMe 2280 MakerDisk 128GB SSD)


Gen 2 (Default)


Using Pibenchmark

Gen 2 (Default)



Argon Neo 5

Improvise cooling solution

  • Impressive thermal dissipation solution for both passive and active cooling.
  • Aluminum case enclosure with passive cooling fins that act as the heatsink
  • Air intake vents allow for cool air to enter the case
  • 30mm PWM fan helps with the airflow and pushes out hot air to exhaust vents

Simple and beautifully designed

  • Made with aluminum alloy and polished with a Black & Red finish for stunning aesthetics.
  • Easy assembly for the 3-part case with the Raspberry Pi 5.
  • A small footprint allows you to bring it anywhere - or easily mount it to your desired station with built-in mounting points.
  • Complete access to all ports with the removable top cover.

Superior protection & security

  • Space-grade aluminum helps protect the Raspberry Pi 5 board from physical damage.
  • The case has a screw-on top cover to keep the ports safe when not in use.
  • Optional SD card cover to protect your data even further.

Native Raspberry Pi 5 board support

  • Integrated power button
  • LED light display


M.2 NVMe Base

  • Boot your Raspberry Pi 5 from NVMe MakerDisk M.2 SSD
  • Built-in heatsink for your NVME SSD 
  • Enjoy faster and higher storage access by connecting NVME SSD via the PCIe slot on the Raspberry Pi 5
  • Versatile M.2 NVME support compatible with any M.2 NVME with M-Key up to 2280 size
  • Greater thermal management on M.2 NVME with included aluminum heatsink specific to M.2 drive to keep it cool, efficient and working longer
  • Reliable and consistent data transfer with included FPC impedance controlled cable
Packing List

Case + NVMe Base + MakerDisk SSD

  • 3 x Part of Argon Neo 5 Case
  • 1 x Argon Neo 5 NVMe PCIe Base
  • 1 x 512GB / 256GB / 128GB NVMe 2280 M-Key MakerDisk SSD (Raspberry Pi OS Ready)
  • 3 x Thermal Paste (1 for SSD)
  • 1 x SD Card Cover
  • 2 x Set Footer
  • 2 x PCIe FFC Cable
  • 6 x Screws
  • 4 x Long Screws
  • 1 x Quick Assembly Guide


Case + NVMe Base

  • 3 x Part of Argon Neo 5 Case
  • 1 x Argon Neo 5 NVMe PCIe Base
  • 3 x Thermal Paste (1 for SSD)
  • 1 x SD Card Cover
  • 2 x Set Footer
  • 2 x PCIe FFC Cable
  • 6 x Screws
  • 4 x Long Screws
  • 1 x Quick Assembly Guide


Case Only

  • 3 x Part of Argon Neo 5 Case
  • 2 x Thermal Paste
  • 1 x SD Card Cover
  • 1 x Set Footer
  • 6 x Screws
  • 1 x Quick Assembly Guide


NVMe Base Only

  • 1 x Argon Neo 5 NVMe PCIe Base
  • 2 x PCIe FFC Cable
  • 1 x Thermal Pad
  • 1 x Set of Footer
  • 4 x Screws




Q & A (1)

Ask a question

  • 4.7 out of 5
  • 5
  • 4
  • 3
  • 2
  • 1
Sort By:

Tags: Raspberry Pi 5, Enclosure, Argon