NLB Maker Kit using Raspberry Pi Pico W

This microcontroller is very famous among makers and IoT enthusiasts. Raspberry Pi Pico Wireless (Pico W), the 1st MCU board from Raspberry Pi with wireless, launched on June 2022. What's more interesting is that Pico W now comes with a Maker Kit!

Raspberry Pi Pico has caught much attention since its launch in early 2021 and Cytron also provides Basic Kit for Raspberry Pi Pico. However, it lacks built-in wireless, and most of the projects nowadays are toward IoT already. Best of all, Pico W has the same 40-pin assignment, dimension, and castellated edge PCB as the Raspberry Pi Pico. The Raspberry Pi Pico W is a direct replacement for Raspberry Pi Pico if you need to upgrade your product to Wireless enabled or IoT! Of course, Raspberry Pi Pico W can be used for physical computing projects where it controls anything from small electronic components, LEDs, and motors; to reading information from sensors, or communicating with other microcontrollers. 

Various types of sensors and actuators are included in this kit. You can do electronic projects, IoT projects, robotic projects and even you can combine robotics with IoT by using this Maker Kit. Awesome isn't it? Unleash your creativity and make your own projects!

• Based on a powerful and reliable microcontroller, Raspberry Pi Pico W
• Comes with various sensors and actuators, a total of 70 extra components
• Capable of making electronics, IoT, and robotic projects
• Supports CircuitPython, MicroPython, C, and C++ Programming Language
• Compatible with any computer with a USB port, Windows, macOS, Linux
• Work seamlessly with Raspberry Pi 4 Model B, or Raspberry Pi 400 and Raspberry Pi OS

Raspberry Pi Pico W Specifications:

• 1st Microcontroller Development Board with Wireless from Raspberry Pi Foundation
• 1st Silicon (IC), RP2040 MCU designed from the ground up by engineers of Raspberry Pi Foundation
• Built-in CYW43439, offers Wireless LAN (WiFi) IEEE 802.11 b/g/n (2.4GHz), and Bluetooth 5.2 (not supported during launch)
• Onboard PCB Antenna
• Dual-Core, 32-bit ARM Cortex M0+ Processor
• Flexible clock, configurable max to 133MHz
• Ready with USB Micro B receptor for Power and Data
• Support USB 1.1 Host and Device
• Connected to the USB port and it will appear as USB Mass Storage by default, no driver is needed
• Drag and Drop Program loading method, just like moving files in Windows Explorer
• Comes in 40-pin 21x51 'DIP' style 1mm thick PCB with 0.1" through-hole pins, breadboard-friendly
• Peripheral rich:
  • Extended out 26 multifunction 3.3V General Purpose I/O (GPIO)
  • 23 GPIO are digital-only
  • 3 x 12-bit ADC capable of 500Ksps, Analog to Digital Converter
  • 2 x UART (Universal Asynchronous Receiver/Transmitter)
  • 2 x SPI (Serial Peripheral Interface)
  • 2 x I2C (Inter IC)
  • 16 x PWM (Pulse Width Modulation)
  • 1 x Timer with 4 alarms
  • 1 x Real Time Counter
  • 2 x Programmable IO (PIO) that can emulate high-speed interfaces such as SD card or VGA
  • Built-in 12-bit ADC temperature sensor
• 3-pin ARM Serial Wire Debug (SWD) port
• Onboard Programmable LED
• Simple yet highly flexible power supply architecture
  • Support USB power, external supply, or even battery power.
• Comprehensive SDK, software examples, and documentation
• Officially from Raspberry Pi Foundation
• Dimensions: 51mm x 21mm x 1mm

• 1 x Raspberry Pi Pico Wireless (Pre-soldered Headers)
• 1 x DHT11 Sensor Module
• 1 x PIR Sensor Module
• 1 x SR04P Ultrasonic Module
• 1 x Light Sensor Module
• 1 x  Maker Soil Moisture Sensor (Capacitive)
• 1 x Neopixel RGB LED Stick
• 1 x 2 Channel 5V Active Low Relay Module
• 2 x SG90 Micro Servo
• 2 x IR Line Tracking Module
• 2 x Buzzer
• 1 x OLED I2C Display
• 1 x 4 Digit 7-Segment Module
• 1 x  2Amp 7V-30V L298N Motor Driver / Stepper Driver (2 Channels)
• 1 x  Mifare RC522 RFID Kit
• 1 x  2WD Smart Robot Car Chassis
• 1 x Breadboard (830 Holes)
• 1 x USB Cable
• 1 x Breadboard Jumper Wire Kit (140pcs)
• 4 x Push Button (4-pin)
• LED
  • 5 x Red
  • 5 x Green 
  • 5 x Yellow
  • 5 x Blue
• Jumper Wire
  • 65 x Male to Male
  • 20 x Female to Female
  • 30 x Male to Female
• Resistor
  • 5 x 0.25W 5% 470 Ohm
  • 5 x 0.25W 5% 330 Ohm
  • 5 x 0.25W 5% 10k Ohm
  • 5 x 0.25W 5% 220 Ohm