Your shopping cart is empty!
13Amp 6V-30V DC Motor Driver
- Brands Cytron Code: MD13S
Brushed motor is the most widely used motor because of the ease of operation. Just supply the two terminals DC power supply, the motor will start rotating! Yet, you need a good motor driver to control the speed and direction from microcontroller. You are at the right page, MD13S is one of the easiest to use brushed motor driver.
MD13S has great improvement in current protection which MD10C does not have. With new circuit and design, MD13S is able to limit and support current up to 30A max(10 seconds). And the continuous current is at 13A without heatsink (at room temperature of 25°C).
Not to forget it is GROVE compatible, so get yourself a Grove shield. Oh, did I mention? MD13S is smaller than MD10C :)
Which brush motor is good to be driven by MD13S? As long as the motor:
Example of suitable DC brush motor with MD13S (Not limit to):
Operating Condition | |
Compatible input | 3.3 and 5V |
Motor Channel | 1 |
Operating Voltage (VDC) | 6 to 30 |
Peak Current (A) | 30 (10 seconds) |
Continuous Current (A) | 13 |
Operating Modes | |
Arduino Shield | No- can be used with Wire connection |
PWM (Lock-Antiphase and Sign-Magnitude) | Yes |
UART | No |
Analog | No |
RC Servo Signal | No |
Special Protection | |
Polarity Protection | NO |
Appearance | |
LEDs Indicator | Yes |
Test/Manual Button | Yes |
Cooling Fan | No |
Other Features | |
Extra Socket | Groove Compatible |
others | No heat sink is required |
Check out some of the videos by user: