International
Singapore
Malaysia
Thailand
Vietnam
Your shopping cart is empty!
DC Motor Driver
Show:
Sort By:
Cytron DC Motor Driver Series are easy to use H-bridge motor drivers that amplify the control signal (e.g. PWM, Direction or Potentiometer Input) to drive a motor. Some of them might come with simple protection features.
| Product Name | Continuous Current | Voltage | Channel | Protection | Input Signal |
|---|---|---|---|---|---|
0.8 Amp (not tested) | 2.5V-12V | 2 |
|
| |
1 Amp | 2.5V-9.5V | 2 |
|
| |
1 Amp (not tested) | 7V-30V | 2 |
|
| |
| 1.5 Amp | 7V-25V | 4 |
|
| |
| 3 Amp | 4V-16V | 2 |
|
| |
| 10 Amp | 5V-30V | 2 |
|
| |
| 10 Amp | 7V-30V | 1 |
|
| |
| 13 Amp | 6V-30V | 1 |
|
| |
| 13 Amp | 5V-30V | 1 |
|
| |
| 20 Amp | 6V-30V | 1 |
|
| |
| 20 Amp | 6V-30V | 2 |
|
| |
| 25 Amp | 7V-58V | 1 |
|
| |
| 30 Amp | 5V-30V | 1 |
|
|
Arduino Form Factor
| Product Name | Continuous Current | Voltage | Channel | Protection | Input Signal |
| 0.8 Amp | 5V-26V | 2 |
|
| |
| 1Amp | 4.8V-24V | 2 |
|
| |
| 1.2 Amp | 7V-30V | 2 |
|
| |
| 10 Amp | 7V-30V | 2 |
|
| |
| 10 Amp | 7V-30V | 1 |
|
|
-0-1-1-800x800.jpg "Shield L298P Motor Driver with GPIO")
Raspberry Pi Form Factor
| Product Name | Continuous Current | Voltage | Channel | Protection | Input Signal |
| 10 Amp | 6V-24V | 2 |
|
|
2Amp 7V-30V L298N Motor Driver / Stepper Driver...
Note: You might want to check out Cytron's latest Maker Drive, which is a good alternative for your project :) Maker Drive is dual channel motor driver with reverse polar..
S$1.75 Ex Tax: S$1.75
Maker Drive: Simplifying H-Bridge Motor Driver ...
Brushed motor is the most widely used motor because it is easy to use. Just supply the two terminals with DC power, the motor will start rotating! If you want to control ..
S$6.43 Ex Tax: S$6.43
10Amp 5V-30V DC Motor Driver (2 Channels)
Note: MDD10A shipped after Jan 2017 is in Rev2.0 which Vmotor supports up to 30VDC.DC brushed motor is the most commonly used and widely available motor in the market..
S$33.57 Ex Tax: S$33.57
3Amp 4V-16V DC Motor Driver (2 Channels)
Looking for a motor driver for your mobile robot? Want to drive a stepper motor? Worry not! MDD3A is able to control two brushed DC motors o..
S$12.14 Ex Tax: S$12.14
10Amp 5V-30V DC Motor Driver
DC brushed motor is the most commonly used and widely available motor in the market. Getting the motor to rotate is fairly easy, just connect the two terminals to power s..
S$19.86 Ex Tax: S$19.86
0.8Amp 2.5V-12V L9110S DC Motor Driver (2 Chann...
Note: You might want to check out Cytron's latest Maker Drive, which is a good alternative for your project :) Maker Drive is a dual channel motor driver with reverse pol..
S$1.79 Ex Tax: S$1.79
10 Amp 7V-30V Potentiometer & Switch Contro...
MD10-POT is a motor driver or speed controller that enables you to easily control a motor's run/brake, direction and speed. No microcontroller is needed in a ..
S$17.14 Ex Tax: S$17.14
30Amp 5V-30V DC Motor Driver
Note: MD30C is Revision 2.0 since January 2016. We know DC brushed motor is widely used for many different applications; from conveyor, AGV (Automated Guide Vehic..
S$50.00 Ex Tax: S$50.00
13Amp 6V-30V DC Motor Driver
Brushed motor is the most widely used motor because of the ease of operation. Just supply the two terminals DC power supply, the motor will start rotating! Yet, you need ..
S$19.86 Ex Tax: S$19.86
-268x268.jpg "Shield L298P Motor Driver with GPIO")
Shield L298P Motor Driver with GPIO
This Motor Driver Shield based on L298P motor driver IC is capable of driving two brushed motor, with speed, direction, start and stop simultaneously. With two full H-bri..
S$14.64 Ex Tax: S$14.64
10Amp 7V-30V DC Motor Driver Shield for Arduino
Cytron 10A Motor Driver Shield (Arduino)"SHIELD-MD10" is a compatible Arduino motor shield for controlling high current brushed DC motor up to 10A continuously. It sh..
S$20.71 Ex Tax: S$20.71
-268x268.jpg "L293D Shield for NodeMCU V2")
L293D Shield for NodeMCU V2
NodeMCU is an open-source development board, based on famous ESP8266 chip (ESP12E or ESP12F), which is a 32-bit controller with integrated WiFi transceiver. And it is ver..
S$4.25 Ex Tax: S$4.25
10Amp 7V-30V DC Motor Driver Shield for Arduino...
Building a mobile robot with Arduino? Want to control high power stepper motor? Look no further! SHIELD-MDD10 is a 2-channel high power motor driver shield fo..
S$37.14 Ex Tax: S$37.14
TB6612FNG Dual Channel 1.2A Motor Driver - Pres...
The TB6612FNG is an easy and affordable way to control motors. The TB6612FNG is capable of driving two motors at up to 1.2A of constant current. Inside the IC, you'll fin..
S$3.89 Ex Tax: S$3.89
20Amp 6V-30V DC Motor Driver (2 Channels)
The MDD20A enables bidirectional control of two high-power brushed DC motors from 6V to 30V. With full discrete NMOS H-Bridge design, this motor driver is able to support..
S$50.00 Ex Tax: S$50.00
10Amp 6V-24V DC Motor Driver HAT for RPI (2 Cha...
Looking for high current motor driver for Raspberry Pi? Here you go, dual channels 10A continuous motor driver for Raspberry Pi.Cytron's latest motor driver is design..
S$40.00 Ex Tax: S$40.00
20Amp 6V-30V DC Motor Driver
The MD20A enables bidirectional control of one high-power brushed DC motor from 6V to 30V. With discrete NMOS H-Bridge design, this motor driver is ..
S$30.00 Ex Tax: S$30.00
25Amp 7V-58V High Voltage DC Motor Driver
The MD25HV is a high-voltage single-channel bidirectional motor driver for brushed DC motor from 7V to 58V. With a discrete NMOS H-Bridge design, thi..
S$84.29 Ex Tax: S$84.29
1.5Amp 7V-25V DC Motor Driver (4 Channels)
This 4 channels DC motor driver is designed for makers who want to build an omnidirectional-drive robot. It enables bidirectional control of four (4) DC brushed motor fro..
S$55.71 Ex Tax: S$55.71
0.8Amp 5V-26V DC Motor Driver Shield for Arduin...
This DC motor driver shield uses L298P chip which allows control of two 5 - 26V DC brush motors with 0.8Amp continuous current each channel. This shield can be directly s..
S$17.14 Ex Tax: S$17.14