Your shopping cart is empty!
RF 4CH Remote Control Kit (Momentory)
- Code: RF-RC-4M
* Come with keyfob remote control (transmitter) and RF module (Receiver)
This Simple RF transmitter and receiver is the easiest way possible to add wireless control, painlessly! There's no programming, configuring or addressing - simply power the receiver with 3.3 -10VDC and press the buttons on matching RF keyfob remote. When button A is pressed, it activates the first pin on RF module (Receiver), when button B is pressed, it activates the second one, and so forth for all four buttons. There's no microcontroller required, its just a simple one-to-one link.
The RF module make it easy to control your project once its in an enclosure or from across the room, but there are some things to watch out for :
This is M4 momentary type acts like a push button - when button A is press down, the matching pin goes high. When button A is released, the matching pin goes low. The pins only go high when a button is pressed.
The T4 toggle type acts like an alternating toggle switch - when button A is pressed the first time, the matching pin goes high. When button A is pressed the second time, the matching pin goes low. The pins are turned on and off by repeated presses.
Video: