48W 8VDC Power Adapter for Build HAT - UK

S$26.79
Cashback: S$0.80
  • 10 or more S$25.43
  • 50 or more S$24.11
  • Availability: 64

    Buy locally from a partner

    Country:
    Description

    With the launch of Raspberry Pi Build HAT, a HAT that enables LEGO® Education Platform lovers to utilize Raspberry Pi Single Board Computer; this 48W power adapter will be essential to power both the Raspberry Pi computer and also the LEGO® electronic parts.

     

    This high-quality PSU is rated to output 8VDC at a maximum output current of 6A. And it is in White color :) Nice!

    This PSU comes with a UK plug type (Type G). According to Plug and Socket, this Type G (UK Plug) adapter is suitable for:

    • Malaysia
    • Singapore
    • UK
    • Ireland
    • Malta
    • Full list here.....

     

    We do recommend it to those who wanted to use Raspberry Pi Build HAT together with the LEGO® Technic™ electronics parts, for example, Motors, Touch Sensor, Distance Sensor, LED matrix, etc. As the LEGO® Technic™ motors require a higher voltage supply than 5V that Raspberry Pi can share. Therefore, this PSU that outputs 8VDC is essential. With its 48W power rating and Raspberry Pi Build HAT, this PSU is able to power both Build HAT and Raspberry Pi computer along with all connected LEGO® Technic™ parts.

     

    It also comes with a 1.5-meter long cable and 16 AWG wires to deliver power. The end of the cable is terminated with DC Barrel Jack (2.1mm center hole) which is just plugged and use with Raspberry Pi Build HAT, there is no polarity concern to be taken care of. 

    With its 48W output power and a 1.5-meter long cable, this PSU provides freedom for makers to create LEGO projects that are both powerful and moveable :)

    Did I mention this PSU comes with Universal AC input which accepts voltage range from 110 - 240VAC, perfect! Just make sure to get the right PLug type for your country :)

     

    Note: This PSU comes with UK Plug (Type G), if you need an EU Plug (Type C) adapter, please get it from here.

     

     

    Warranty Period: 12 months
    Features

    Features and Specs:

    • Maximum Power: 48.0 W
    • An official PSU from Raspberry Pi
    • Color: White
    • Plug type: UK Plug, Type G
    • Cable Length: 1.5 meters
    • Wire Thickness: 16 AWG captive cable
    • Protection:
      • Short circuit
      • Over-current
      • Over-voltage
    • Input Voltage: Universal, 110V - 240VAC
    • Output Voltage: +8VDC 
    • Minimum Load Current: 0.01A
    • Maximum Load Current: 6A
    • Load Regulation: ± 5%
    • Line Regulation: ± 5%
    • Ripple & noise: 200mVp-p
    • Rise time: 100ms maximum to regulation limits for DC outputs
    • Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
    • Efficiency: 87.77% minimum (output current from 100%, 75%, 50%, 25%)
    • AC Voltage Input Range:
      • 100-240VAC (rated)
      • 96 - 264VAC (operating)
    • AC Frequency: 50/60Hz ± 3 Hz
    • AC Current: 1.2A maximum
    • Power Consumption (no load): 0.1W maximum
    • Inrush current: No damage shall occur and the input fuse shall not blow
    • Meant to be used with Raspberry Pi Build HAT
    • Dimension: 51 x 92 x 25.5mm

     

    Packing List
    • 1 x 48W 8VDC Power Adapter for Build HAT - UK

    Resources
    Q & A

    Ask a question

    Reviews
    • 5 out of 5
                    
    • 5
      100%
    • 4
      0%
    • 3
      0%
    • 2
      0%
    • 1
      0%
    Sort By:

    Tags: UK, Type C, LEGO SPIKE PRIME, LEGO Technic, Build HAT, LEGO Motor, LEGO sensor