New

Piunora Raspberry Pi CM4 Carrier Board and Kits

    • Login to view ProMaker's Insider Price!
    • S$69.64 - S$168.57
  • Ex Tax: S$69.64
    • Cashback: S$2.09 - S$4.96
    • CytronCash Balance: Login

    Available Options

    • Carrier Board + CM4W416 + PSU
    • Carrier Board ONLY
    • Availability:
      5

    Accessories you may need

    Enter desired quantity before clicking 'Add to Cart' button

    Official RPi HDMI to HDMI Cable (1m White)

    Official RPi HDMI to HDMI Cable (1m White)

    • 10 or more S$6.57
    • 50 or more S$5.71

    S$7.50 Ex Tax: S$7.50

    Compatible Dual Band Antenna for CM4

    Compatible Dual Band Antenna for CM4

    • 5 or more S$4.43

    S$4.61 Ex Tax: S$4.61

    • Total accessories: S$0.0
    • Grand total: 69.64-168.57

    • Product Code: V-PNR-CM4W416
    • Warranty Period: 12 months

    Note: This page offers a few options for PIUNORA Carrier board and kit with Raspberry Pi Compute Module 4 - built-in wireless: WiFi and Bluetooth, 2GB RAM and no eMMC (Lite). Please choose the preferred option:

     

    Note: For the kit/s, an UK plug (Type G) power adapter is included, it is suitable for Malaysia and Singapore.

    Note: The Official Power Supply Unit (PSU) will be either in Black or White Color depending on availability.

     


     

    PIUNORA Carrier Board

    We have included the PIUNORA Carrier Board for the CM4 Wireless module. It enables you to get started with the Raspberry Pi CM4.

    Piunora is a compact, easy-to-use development board for electronics prototyping with Linux. It has a familiar form factor, legible pin labels, and a design that's well suited to space-constrained applications. As a carrier board for the Raspberry Pi Compute Module 4 (CM4), Piunora is essentially a tiny version of the Raspberry Pi 4 Single Board Computer (SBC) with added flexibility to accommodate custom form factors.

    In a limited space, the board has been designed to pack with powerful peripherals for rapid prototyping and embedded machine-learning applications. Piunora is open hardware that both the design files and the software is published here.

    The board comes with:

    • 1 x USB-C port for power, and data to load the OS image into the eMMC (for CM4 with built-in eMMC)
    • 1 x Slide switch to configure USB-C's USB mode
    • 1 x USB2.0 Type-A port
    • 1 x Full-Size HDMI 2.0 port
    • 1 x CSI camera-input connector
    • 1 x PCI-e bus which is being breakout into an M.2 B-Key port on the rear of the board. The M.2 B-Key port is not only useful for (NVMe) SSD storage, but it can also host a diverse range of PCI-e expansion boards. 
      • Support M.2 2242 or 2230 Module
    • 1 x Qwiic/Stemma QT port
    • 2 x Push Buttons (programmable)
    • 2 x Indicator LEDs (Power and Activity)
    • 1 x RGB LED (programmable)
    • 1 x MicroSD Card slot (push latch push release)
    • GPIO breakout into Arduino UNO form factor
    • 1 x MCP3008,  ADC IC that enables Analog Input right out of the box (with Piunora Image)
    • 1 x CSI port, at the rear of the board
    • 2 x CM4 100-pin socket for stacking CM4

     

     

    It's worth noting that, Piunora is open hardware, fully compatible with Raspberry Pi CM4, as long as that software accounts for the hardware peripherals in use. It allows you to utilize the huge collection of existing drivers for the ecosystem and enables you to develop embedded applications using Piunora as easily as possible.

     

    Piunora is an ideal solution for working with Electronics, where it contains Adafruit and SparkFun developed Qwiic/StEMma-Qt compatible connectors to connect hundreds of high-end sensors quickly and easily through daisy-chain IIC devices via Python. The board includes a Type-C port that can support a power supply and USB 2.0 data transmitting. It consumes less power than the full-featured Raspberry Pi 4 and it can directly be programmed by CircuitPython through a compatibility layer - Adafruit Blinka on Linux SBCs. Additionally, there is an M.2 B-Key connector that it provides a perfect interface for a more compact style of add-on board which means it can be utilized to develop a simple, space-efficient, USB-enabled MCU solution.

     

    Raspberry Pi Compute Module 4

    Compute Module 4 is officially launched on 19th October 2020 with the same or better spec, and there are 32 variants of the module to choose from. This product page lists Compute Module 4 which comes WITH Wireless (WiFi and Bluetooth), 2GB RAM, and Lite (No eMMC).

     

    The Raspberry Pi Compute Module 4 (CM4) and Compute Module 4 Lite (CM4Lite) are loosely based on the Raspberry Pi 4 Model B. The CM4 has an option for cost-sensitive applications to be supplied without the eMMC fitted; this version is called the CM4Lite. The form factor of the new CM4 and CM4L is different from previous Compute modules, which have all shared a form factor. The change is due to the addition of new interfaces; a second HDMI, PCIe, and Ethernet. The addition of these new interfaces, especially PCIe, would not have been possible while preserving the older form factor. Instead, the electrical interface of the CM4 is via two 100-pin high-density connectors. While the switch to a newer form factor has allowed a reduction in the footprint. The total footprint of the CM4, including the socket, is smaller with the new form factor design.

    The back of CM4. The electrical interface of the CM4 is via two 100-pin high-density connectors at the back of the PCB.

     

    Here is the top view of CM4 with Wireless Lite (No eMMC):

    Compute Module 4 with built-in Wireless, Lite (No eMMC)

     

    As you might have known, due to the higher power requirements, it is best to provide at least a stable 5V 3A power supply to the Raspberry Pi CM4. The kit included the Official Raspberry Pi 5V 3A USB-C Adapter with a UK plug (type G) and is meant for the Raspberry Pi CM4 and is suitable to be used in Singapore, Malaysia, the UK, etc.

    Note: The Official Power Supply Unit (PSU) will be either in Black or White Color depending on availability.

     

    Since the CM4 Lite does not come with onboard eMMC, it will need an external microSD card that has a compatible OS image to boot up. So 1st thing after you get the Piunora board and a proper power supply, you will need a microSD card (at least 8GB) with a suitable OS image in it, we recommend using the official OS for Raspberry Pi, which is Raspberry Pi OS. Due to the default settings of the USB 2.0 on CM4 (USB2.0 is disabled by default to save power), you will need to edit the config.txt on the OS, so that is the reason we recommend a microSD card pre-loaded with the official operating system and a USB microSD card reader/writer. 

    A tiny and useful USB MicroSD Card Reader/Writer is included

     

    The MakerDisk MicroSD card is tested and approved by Raspberry Pi Foundation. And it comes preloaded with the official Raspberry Pi OS. So it can boot up directly on the Piunora Board with CM4 Lite. In case you want to load another OS, you can still do it using Raspberry Pi Imager which you can download from here. It is compatible with Windows, macOS, Unbuntu and even the Raspberry Pi itself can also load OS images using Raspberry Pi Imager.

    Anyway, by default, the USB 2.0 on CM4 is DISABLED in the Raspberry Pi OS, this is to save power. You will need to edit a file on the microSD card in order to enable the USB ports on the board. Else, the USB keyboard or mouse will not be able to function, so don't be surprised.

    1. Insert the microSD card into the USB MicroSD card Reader/Writer, then plug the USB Reader/Writer into your computer USB port. Please DO NOT format any of the drives.

    2. Goto the boot drive and open the config.txt using a plain text editor, e.g.: Notepad

    3. Add this command line (from CM4 IO Board datasheet, page 5) into the config.txt file and save it:

    dtoverlay=dwc2,dr_mode=host

    4. Eject the drive from your computer again, Unplug the USB MicroSD card Reader.

    5. Insert the MicroSD card into the Piunora Board's MicroSD Slot, and mount the CM4 Lite. Connect the USB device, HDMI Cable if there is any, and lastly the Power Adapter.

    6. Continue your development :)

    Of course, you can also check out these accessories in case you do not have one:

    Features and Spec:

    • Piunora Carrier Board:
      • Arduino UNO R3 / Adafruit Metro compatible form factor (3.3V IO logic, may not be compatible with all Shields)
      • PCI-e through M.2 B-Key connector on the rear of the board with dedicated 3.3VDC / 3 A supply
        • The M.2 B-Key DOES NOT support M.2 SATA SSD drive
        • The M.2 B-Key supports M.2 NVMe SSD drive
      • Analog to Digital Converter (MCP3008)
      • On the fly switching between USB host (USB Type-A) and device mode (USB Type-C)
      • Qwiic/Stemma QT connector to easily interface with I²C devices
      • A full-sized camera connector (CSI) that supports all Pi-compatible cameras
      • A full-sized HDMI 2.0 port
      • A WS2812(Neo-Pixel) Smart RGB LED for user status
      • Optional Wi-Fi or eMMC options depending on your choice of CM4
      • Slim design measuring 11-13 mm
      • Two user-controllable buttons (including software that turns one of them into a safe-shutdown button)
      • Piunora is open hardware, please get the documentation here.
      • Power Input: 5V, via USB-C receptor

     

    • CM4 Wireless, 2GB RAM, Lite (No eMMC):
      • Processor: Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
      • H.265 (HEVC) (up to 4kp60 decode), H.264 (up to 1080p60 decode, 1080p30 encode)
      • OpenGL ES 3.0 graphics
      • 2GB LPDDR4-3200 SDRAM
      •  Lite Version, without onboard eMMC
      • built-in Fully certified radio module with :
        ◦ Dual-band WiFi: 2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac wireless
        Bluetooth 5.0, BLE
        ◦ Onboard electronic switch to select between external or PCB trace antenna
      • Gigabit Ethernet PHY supporting IEEE 1588
      • 1 x PCIe 1-lane Host, Gen 2 ( 5Gbps )
      • 1 x USB 2.0 port ( highspeed )
      • 28 x user GPIO supporting either 3.3V or 1.8V signaling and various interface options:
        • Up to 6 x UART
        • Up to 6 x I2C
        • Up to 5 x SPI
        • 1 x SDIO interface
        • 1 x DPI (Parallel RGB Display)
        • 1 x PCM
        • Up to 2 x PWM channels
        • Up to 3 x GPCLK outputs
      • 2 x HDMI 2.0 ports (up to 4kp60 supported)
      • MIPI DSI:
        • 1 x 2-lane MIPI DSI display port
        • 1 x 4-lane MIPI DSI display port
      • MIPI CSI-2:
        • 1 x 2-lane MIPI CSI camera port
        • 1 x 4-lane MIPI DSI camera port
      • 1 x SDIO 2.0 (CM4Lite only)
      • Single +5VDC Power Supply Unit input
      • Small Footprint 55mm x 40mm x 4.7mm with 4 x M2.5 mounting holes

    Packing List:

     

     

    • PIUNORA Raspberry Pi CM4 Carrier Board
      • 1 x Piunora Raspberry Pi CM4 Carrier Board
      • 1 x footers, 4 in a set
      • 2 x small Philips screw for M.2 module mounting

    Resources:

     

    No questions have been asked about this product.

    Ask a question

    Note: HTML is not translated!
    • 5 out of 5
                    
    Total Reviews (2)
    • 5
      100%
    • 4
      0%
    • 3
      0%
    • 2
      0%
    • 1
      0%

    Tags: complete kit, CM4, compute module 4, , eMMC, piunora, Carrier Board