StoreIndustryEducation
    International Singapore Malaysia Thailand Vietnam
Products

Raspberry Pi

micro:bit

Arduino Ecosystem

Artificial Intelligence

IoT & Wireless

Motor & Motor Driver

3D Modeling

Industry

Development Tools

Robotics & Electronics

Junior Makers

Sensors

Miscellaneous

Shop By

Featured

Popular

Promotions
Official Raspberry Pi High Quality Camera Module
Official Raspberry Pi High Quality Camera Module Official Raspberry Pi High Quality Camera Module Official Raspberry Pi High Quality Camera Module Official Raspberry Pi High Quality Camera Module Official Raspberry Pi High Quality Camera Module Official Raspberry Pi High Quality Camera Module Official Raspberry Pi High Quality Camera Module

Official Raspberry Pi High Quality Camera Module

S$88.93
Cashback: S$2.67
  • HQ Cam + 16mm + 6mm Lenses
  • HQ Cam + 16mm Lens
  • HQ Cam + 6mm Lens
  • High Quality Camera Module
  • 16mm Telephoto Lens
  • 6mm Wide Angle Lens
Availability: Out Of Stock
Notify me!

Buy locally from a partner

Country:

Accessories you may need

Official Raspberry Pi 5 CSI Cable for Camera

Official Raspberry Pi 5 CSI Cable for Camera

S$2.46++

Add to Cart
Description
Note: This page has several variations of the official Raspberry Pi High-Quality Camera module and the lenses. Please select the option you preferred correctly.
 
 
 
 
 
Raspberry Pi HQ Camera+16mm+6mm Lens Raspberry Pi HQ Camera + 16mm LensRaspberry Pi HQ Camera + 6mm Lens
 

 

 

 
Raspberry Pi HQ Camera Module16mm Telephoto Lens (C Mount)6mm Wide Angle Lens (CS Mount)
 
 

The Official Raspberry Pi High Quality Camera Module

 
The Raspberry Pi High-Quality Camera is the latest camera accessory from Raspberry Pi. It offers higher resolution and sensitivity (approximately 50% greater area per pixel for improved low-light performance) than the existing Camera Module v2.
 
 
The package comprises a circuit board carrying a Sony IMX477 sensor, an FFC (Flexible Flat Cable) cable for connection to a Raspberry Pi computer, a milled aluminum lens mount with integrated tripod mount, and focus adjustment ring, and a C- to CS-mount adapter. This is the first official HQ (High Quality) camera module from Raspberry Pi.
 
Here is some info about C-mount and CS-mount from meijitechno.com:

"C- and CS-mount lenses are both threaded lens mounts found on most industrial CCD cameras and lenses. The difference between C and CS-mount equipment is the distance between the flange of the lens (the part of the case that butts up against the camera) and the focal plane of the lens (where the CCD sensor must be positioned). This is known as the flange back distance.

The C-mount lens specification for flange back distance is 17.53 mm, and on CS-mount lenses, it is 12.53 mm. If you have a CS-mount camera and a C-mount lens, you can add a 5mm spacer to obtain the correct focus. If, however, you have a C-mount camera and a CS-mount lens, the correct focus cannot be achieved."

 
With the ultra-high quality 12MP(megapixel) SONY IMX477 image sensor as compared to 8MP on Camera module V2. This High Quality Camera provides an alternative to the Camera Module v2 for industrial and consumer applications, including security cameras, which require the highest levels of visual fidelity and/or integration with specialist optics. It is compatible with all models of Raspberry Pi computer from Raspberry Pi 1 Model B onwards, using the latest software release from www.raspberrypi.org.

 

 
The HQ Camera module comes with the standard 15-pin FFC cable (20cm length) for you to connect it to the Raspberry Pi board. This HQ camera module is designed to work with interchangeable lenses in both C- and CS-mount form factors. Other lenses form factors can be accommodated using third-party lens adapters too. However, the HQ camera module only DOES NOT come with a lens, yet it MUST have a lens to operate, so choose either one of the kits or match it with your preferred lens. 
 

Raspberry Pi 16mm Telephoto Lens (C Mount)

This is the 16mm Telephoto Lens mounted on HQ camera, the C-CS-mount adapter is NEEDED.

 

 

The 6mm Wide Angle Lens (CS Mount)

 

This is the HQ Camera with a 6mm Wide-Angle Lens, please REMOVE the C-CS-mount adapter.

 

This video shows the setup HQ camera + 6mm lens and Raspberry Pi 4 Model B. Here are the photo and video files that were taken with this setup, in Google Drive.

 

The video demonstrates the use of HQ camera + 6mm lens with Raspberry Pi Zero W. Here are the photo and video files taken with this setup, in Google Drive.

 
Check out the video and explanation by DroneBot Workshop:
 
 

You can get different lengths of 15-pin Ribbon/FFC cable for better movement of the HQ camera. We have tried up to 1 meter and it works fine:

As mentioned earlier, this HQ camera module interface to Raspberry Pi by way of a 15-pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the Raspberry Pi's processor.

With this HQ camera, you can now capture the high-resolution picture with Raspberry Pi, and with the adjustable lens to get different aperture and focus points.

This HQ camera module is compatible with:

Note: The HQ Camera module is NOT compatible with the 1st version of the Raspberry Pi Zero board that does not come with CSI port.

Not familiar with the Raspberry Pi HQ Camera? Fear not, check out the official HQ camera guide from Raspberry Pi.

    Warranty Period: 12 months
    Features

    Raspberry Pi HQ Camera Module:

    • Image Sensor:
      • SONY IMX477R stacked, black-illuminated sensor
      • 12.3 Megapixels
      • 7.9mm sensor diagonal
      • 1.55um x 1.55 um pixel size
    • Output: RAW12/10/8, COMP8
    • Back Focus: Adjustable (12.5mm - 22.4mm)
    • Lens standards: C-mount or CS-mount (C-CS-mount adapter included and mounted on the camera by default)
    • No focusing lens included, but it is a MUST to have a lens, so get it separately:
    • IR filter: integrated
    • Ribbon cable/FFC length: 200mm
    • Tripod mount: 1/4" - 20
    • Compliance:
      • FCC 47 CFR Part 15, Subpart B, Class B Digital Device
      • Electromagnetic Compatibility Directive (EMC) 2014/30/EU
      • Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU
    • Connects to the Raspberry Pi board via the FFC/Ribbon cable (included)
    • Size: 38mm x 38mm x 18.43mm
     
     
    Raspberry Pi 16mm Telephoto Lens (C Mount):
    • Image Format: 1"
    • Focal Length: 16mm
    • Resolution: 10MegaPixel
    • Aperture: F1.4 - 16
    • Mount: C
    • Field Angle DxHxVº:
      • 1": 44.6º x 33.6º
      • 2/3": 30.0º x 23.2º
      • 1/1.8": 24.7º x 18.6º
      • 1/2": 21.8º x 16.4º
    • M.O.D.: 0.20m
    • Back Focal Length: 17.53mm
    • Optical Length: 67.53mm
    • Distortion:
      • 1" (-0.7%)
      • 1/2" (-0.5%)
      • 1/3" (-0.15%)
    • Dimension: Φ39.00x50.00mm
    • Net Lens Weight: 133.7gram
    • Operation: Manual

     

    Raspberry Pi 6mm Wide Angle Lens (CS Mount):

    • Image Format: 1/2"
    • Focal Length: 6mm
    • Resolution: 3MegaPixel
    • Aperture: F1.2
    • Mount: CS
    • Field Angle DxHxVº: 63º
    • M.O.D.: 0.2m
    • Back Focal Length: 7.53mm
    • Dimension: 30x34mm
    • Net Lens Weight: 53gram
    • Operation: Manual

     

     

     
    Packing List
    • HQ Cam + 16mm + 6mm Lenses
      • 1 x Official Raspberry Pi HQ Camera Module that contains:
        • 1 x Official Raspberry Pi HQ Camera Module
        • 1 x C-CS-mount adapter (normally mounted on the HQ Camera module
        • 1 x Dust cap
        • 1 x FFC Cable (200mm)
      • 1 x Raspberry Pi 6mm Wide Angle Lens (CS Mount)
      • 1 x Raspberry Pi 16mm Telephoto Lens (C Mount)

     

    • HQ Cam + 16mm Lens:
      • 1 x Official Raspberry Pi HQ Camera Module in a box, with:
        • 1 x Official Raspberry Pi HQ Camera Module
        • 1 x C-CS-mount adapter (normally mounted on the HQ Camera module
        • 1 x Dust cap
        • 1 x FFC Cable (200mm)
        • 1 x Back Focus Adjustment Tool (tiny flat screwdriver, in the box)
      • 1 x Raspberry Pi 16mm Telephoto Lens (C Mount)

     

     

    • HQ Cam + 6mm Lens:
      • 1 x Official Raspberry Pi HQ Camera Module that contains:
        • 1 x Official Raspberry Pi HQ Camera Module
        • 1 x C-CS-mount adapter (normally mounted on the HQ Camera module
        • 1 x Dust cap
        • 1 x FFC Cable (200mm)
        • 1 x Back Focus Adjustment Tool (tiny flat screwdriver, in the box)
      • 1 x Raspberry Pi 6mm Wide Angle Lens (CS Mount)

     

     

    • Raspberry Pi HQ Camera Module:
      • 1 x Official Raspberry Pi HQ Camera Module in a box, with:
        • 1 x Official Raspberry Pi HQ Camera Module
        • 1 x C-CS-mount adapter (normally mounted on the HQ Camera module
        • 1 x Dust cap
        • 1 x FFC Cable (200mm)
        • 1 x Back Focus Adjustment Tool (tiny flat screwdriver, in the box)
     
     
     
    • Raspberry Pi 16mm Telephoto Lens:
      • 1 x Raspberry Pi 16mm Lens (C Mount)

     

    • Raspberry Pi 6mm Wide Angle Lens:
      • 1 x Raspberry Pi 6mm Wide Angle Lens (CS Mount)

     

    Resources
    Q & A (4)

    Ask a question

    Reviews
    • 4.9 out of 5
                    
    Total Reviews (89)
    • 5
      92.13%
    • 4
      4.49%
    • 3
      1.12%
    • 2
      1.12%
    • 1
      1.12%
    Sort By:

    Tags: HQ camera 12MP Image module CS C Mount focus lens