Keyestudio 37 in 1 Sensor Kit V3.0

This is a 37-in-1 Sensor Kit from keyestudio. It includes digital and analog sensors as well as special modules such as ultrasound, digital tubes, temperature, and humidity. For each module, there is a clear connection diagram and sample code. So it's easy to operate even you are a newbie. You'll surely be able to have a lot of fun with this variety of sensors, can even build a robot!

The sample code of this sensor suite is based on Arduino, it is open source and easy to use. You can also apply this kit to other development platforms such as 51, STM32, Raspberries Pi, micro:bit if you're good at it. The working principle of those platforms is almost the same. Now let's enter the world of robotic sensors and learn together!

Packing list:

• 37 sensors:
  1. 1 x White LED module
  2. 1 x RGB LED module
  3. 1 x Traffic light module
  4. 1 x Active buzzer
  5. 1 x Passive buzzer
  6. 1 x Motor module
  7. 1 x Digital push button
  8. 1 x Collision sensor
  9. 1 x Line tracking sensor
  10. 1 x Infrared obstacle avoidance sensor
  11. 1 x Photo interrupter
  12. 1 x Hall magnetic sensor
  13. 1 x Knock sensor
  14. 1 x Digital tilt sensor
  15. 1 x Capacitive touch sensor
  16. 1x Flame sensor
  17. 1 x Reed switch module
  18. 1 x PIR motion sensor
  19. 1 x Analog temperature sensor
  20. 1 x Potentiometer/variable resistor
  21. 1 x Photocell
  22. 1 x Microphone/sound sensor
  23. 1 x Water level sensor
  24. 1 x Soil moisture sensor
  25. 1 x Steam sensor
  26. 1 x Analog ceramic vibration sensor
  27. 1 x Voltage sensor
  28. 1 x Digital IR receiver
  29. 1 x Digital IR transmitter
  30. 1 x Pulse rate sensor
  31. 1 x Joystick module
  32. 1 x Rotary Encoder
  33. 1 x Single Relay
  34. 1 x Linear Temperature
  35. 1 x DHT11 Temperature and Humidity sensor
  36. 1 x Ultrasonic sensor
  37. 1 x 4-digit LED Display
• 1 x User guide

• Product wiki
• Project examples