Grove - 16 x 2 LCD (White on Blue) is mono color backlight LCD type.This grove LCD comes white on blue display.With 16 characters wide, 2 rows high brightness backlight.It supports I2C communication with your microcontroller.So number of pins required for data exchange and backlight control shrinks from ~10 to 2, relieving IOs for other challenging tasks.This grove are also able to display English and Japanese fonts which is very convenient for user.
Ready to use with microcontrollers as digital input. This product also has a compact modular design Plug-and-play grove compatible interface.
In the picture above, the grove shield for Arduino is stacked with Seeeduino V4.2. Of course you can use that shield with Arduino too :)
Note: Controllers are sold separately.
- Display construction: 16 Characters * 2 Lines
- Display mode: STN
- On board MCU
- I2C-bus interface
- Support English and Japanese fonts
I2C Pull-Up Resistor
The first version of Grove - 16 x 2 LCD series does not have a built-in pull-up resistor, nor does it provide a pad to solder the optional pull-up resistor. The module is redesigned, and the new version has built-in pull-up resistors.
If you have an older version on your hand, you can solder a 10kΩ DIP resistor yourself on the back pad of the Grove connector. Please follow the picture below, solder a 10kΩ DIP resistor between VCC and SCL pins and a 10kΩ DIP resistor between VCC and SDA pins.
- Operating Voltage : 3.3V or 5V
- Operating temperature : 0 to 50℃
- Storage temperature : -10 to 60℃
- Driving method :1/16 duty, ⅕ bias
- Interface : I2C
- I2C Address : 0X3E
Grove - 16 x 2 LCD dimension.
- Temperature display
- Time display
- Any project that requires a simple display
- 1 x Grove - 16 x 2 LCD (White on Blue)
- 1 x Grove 4 Pin Buckled 20cm Cable