Madness Deal! Get Maker Nano at S$1.99 More Info Limited Qty Only
Ethernet Shield V2.0

Ethernet Shield V2.0

    • Login to view ProMaker's Insider Price!
    • S$10.00
  • Ex Tax: S$10.00
    • 10 or more S$9.60
    • 30 or more S$9.00
  • Cashback: 3%
  • CytronCash Balance: Login
  • Availability:
    Backorder Only
  • Estimate 30 units available on 5th Oct.
  • Product Code: SHIELD-ETHER-SD
  • Warranty Period: 12 months
  • Shipping:

The Ethernet Shield V2.0 is finally released and supports both Mega 1280 and 2560. Besides, it also supports micro SD card read/write. The ethernet shield is fully functional now. The V2 Ethernet Shield is fully compatible with Ardunio Ethernet Shield. With the offical ethernet library, you can do exactly the same thing as the original one. But at a more affordable price.

The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield.

The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top. Arduino uses digital pins 10, 11, 12, and 13 (SPI) to communicate with the W5100 on the ethernet shield. These pins cannot be used for general I/O. The shield provides a standard RJ45 ethernet jack. The reset button on the shield resets both the W5100 and the Arduino board.

The shield contains a number of informational LEDs: 

  • PWR: indicates that the board and shield are powered
  • LINK: indicates the presence of a network link and flashes when the shield transmits or receives data
  • FULLD: indicates that the network connection is full duplex
  • 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)
  • RX: flashes when the shield receives data
  • TX: flashes when the shield sends data
  • COLL: flashes when network collisions are detected Compatibility
Working with: Arduino Uno, Arduino Mega, Arduino Duemilanove.

Tutorials:
Hi, is this compatible with the maker uno? ( MM, 25/03/2020 )
Hi, yes it is compatible with Maker UNO. Thanks :)
the pin used by the shield 10 etc, if i want to use rfid that use the same pin, can it be used? ( kader, 09/02/2020 )
Hi, if I2C protocol then yes,  another protocol cannot use the same pin. Thanks :)
Hi, Is it support PoE.
PoE will take power from RJ45 and power up the shield and Arduino board
( wan roslan, 31/01/2020 )
Hi, this product do not support PoE.
Hi. can SHIELD-ETHER-SD compatible with Cytron UNO? ( Albert Foo, 15/03/2019 )
Hi, yes it is compatible with Cytron UNO - Arduino UNO Compatible.

Can you provide the official documentation for this board? if have. ( Zar, 13/12/2018 )
Hi, the Schematic of this board is available at the attachment tab and sorry we don't have any other official documentation. Thanks.
Hi, may I know the minimum and maximum size of SD card supported by the module? ( Mohamed Faisal bin Abdul Waduth , 10/11/2018 )
Hi, the minimum and maximum size of SD card supported are not determined by the module but it depends on the Microcontroller that you use. For Arduino, there didn't state the limit size but they suggested the  cards to be formatted FAT32 or FAT16
compatiable with maker uno? ( hi, 01/05/2018 )
Hi, yes it is compatible. Thanks.
how long the shipping? Can provide COD at perlis?
( SUIT MUN NG, 21/11/2017 )
Hi, we do not accept COD, for more information regarding product shipping, you can refer to Delivery Information. Thanks.
Hi . does this shield compatible with arduino uno board ? TQ :) ( MUHD AJMAL NA'IM, 08/08/2017 )
Hi, yes it is compatible. For further questions, please visit to our technical forum as this session is only for short inquiry. Thanks.
Hi there, when will it be restocked? ( CSL, 11/10/2016 )

Hi, 

Within 1 or 2 week.. Thanks.

Ask a question

Note: HTML is not translated!
DescriptionDate AddedSizeAction
Schematic19/02/202027.63KBDownload
Ethernet Library19/02/2020N/ADownload
  • 5 out of 5
                  
Total Reviews (20)
  • 5
    100%
  • 4
    0%
  • 3
    0%
  • 2
    0%
  • 1
    0%

Tags: ethernet, shield, v2.0, arduino, W5100 shields, shield-ether-sd