DIN Rail Case for Raspberry Pi 4 Model B

S$8.04
Cashback: 3%
  • 5 or more S$7.61
  • 20 or more S$6.82
  • 50 or more S$6.00
  • Availability: 22

    Buy locally from a partner

    Country:
    Description

    The DIN-rail mountable enclosure is designed specifically for the Raspberry Pi 4 Model B.

    Note: Raspberry pi 4B is NOT INCLUDED in the package.

    This is the 4M Modulbox, a DIN rail mountable enclosure with a transparent removable top for easy access! The kit comes complete with DIN rail hook for ultra-fast mounting.

    The unit features 36mm internal clearance from the Raspberry Pi PCB to the top of the case, so there's plenty of room for GPIO mounted expansion boards. Check out this video here that shows you how you should install the casing and how it works on a DIN rail:

    How to assemble:

    • Remove the sliding lock(buckle) and then open the box.

    • Place your raspberry pi board on the bottom part of the box. There are two self-taping screws to fasten the Raspberry Pi 4 Model B board to the base. You can add extra heatsink if you want at this stage. BTW, the self-taping screw is slightly bigger than the Raspberry Pi mounting hole, you will need to use extra force to fasten it through the Raspberry Pi board's PCB and to the enclosure base.

    • Close the box and insert the sliding lock and buckle it. The top and bottom base is snap and fit, no screw is needed :)
    •  Mount the box to the wall or electrical box.

    Note: We notice removing microSD card from Raspberry Pi is not as easy, you might need a tweezer

    Warranty Period: 12 months
    Features
    • Case for Raspberry with DIN module fixing for Electric switchboards and modular Switchboards. Excellent for RASP-PBX and many other uses.
    • DIN rail support, the standard for fixing electrical components.
    • All Raspberry ports remain available. The transparent top is removable.
    • Easy to install, simple snap-fit with lower release lever. The overall size is 4 DIN modules.
    • Dimensions (LxWxH): 90.5x71.3x62mm
    • Weight: 58g
    Packing List

    Packing list:

    • 1 x DIN-Rail Case
    • 2 x 3mm self-taping screw
    Resources
    Q & A (1)

    Ask a question

    Reviews
    • 4.8 out of 5
                    
    • 5
      91.67%
    • 4
      0%
    • 3
      8.33%
    • 2
      0%
    • 1
      0%
    Sort By:

    Tags: DIN rail, enclosure, raspberry pi 4B, Junction box mounting