Best Seller 3.5-Inch TFT Touch Screen for RPI 3B/3B+/4B

3.5-Inch TFT Touch Screen for RPI 3B/3B+/4B

    • Login to view ProMaker's Insider Price!
    • S$23.21
  • Ex Tax: S$23.21
    • 5 or more S$22.04
    • 20 or more S$22.04
    • 50 or more S$17.39
  • Cashback: S$0.70
  • CytronCash Balance: Login
  • Availability:

Accessories you may need

Enter desired quantity before clicking 'Add to Cart' button

Raspberry Pi 3 Model B+

Raspberry Pi 3 Model B+

    S$55.99 S$59.29 Ex Tax: S$55.99

    • Total accessories: S$0.0
    • Grand total: 23.21

    • Product Code: DS-TFT-3.5
    • Warranty Period: 12 months
    • Shipping:

    Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay so it is slightly larger than the Raspberry Pi board, which is perfect to cover it. The plate uses a high-speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video, etc. Best of all it plugs right on top nicely covering the Raspberry Pi board. Single power from Raspberry Pi is sufficient to operate the screen. As it uses the SPI and Power pin from Raspberry Pi's GPIO, it is nicely stacked on the Rpi board. We also carry the perfect case/enclosure for Raspberry Pi 3B/3B+ and also 4B to be used with this LCD.

    check this video out where we assemble the Raspberry Pi 3B+ and the LCD enclosed with the case.

    And here is the LCD in action:

    Here is another video in Bahasa Malaysia with English Subtitles to install the graphics and touch screen driver on Raspberry Pi 4 Model B:
    Here is pin assignment table of this touch screen LCD:

    Note: The graphic can only be displayed through HDMI or this Touch Screen LCD.

    We have tested and verified this touch screen LCD with:

    Yet, it should be working perfectly with:

    Note: Do remember to install the driver for graphic and also touch screen controller :)


    • 480x320 resolution
    • Universal 3.5” Display for the Raspberry Pi
    • Compatible with Raspberry Pi A, B, A+, B+, and Pi 2/3/4 versions
    • Powered not only from your computer but also from your portable power
    • Adapt for Raspbian system
    • LCD Type: TFT
    • LCD Interface: SPI
    • Touch Screen Type: Resistive
    • Touch Screen Controller: XPT2046
    • Colors: 65536
    • Backlight: LED

    Packing List:

    • 3.5" TFT Resistive Touch Screen with SPI Interface
    • Small Pen


    Check out the calibration process:

    Here are the steps we refer from this wiki page to install driver graphic controller and touch screen controller:

    Driver Installation:

    This LCD Module need install driver first:

    1. Assuming you have run Raspbian either from NOOBS or Raspbian Image, please get the image from here, or the microSD card with NOOBS from here: 16GB, 32GB.

    2. Open terminal(SSH) and install the driver on Raspberry Pi: (tested on Raspberry Pi 3B+,3B,2B,2B+,1B,ZERO)

    Run these commands in terminal:

    sudo rm -rf LCD-show

    git clone

    chmod -R 755 LCD-show

    cd LCD-show/

    sudo ./LCD35-show

    Wait a few minutes, after reboot, the graphic will appears on touch screen LCD.

    Touch screen calibration:

    This LCD can be calibrated using a program called xinput_calibrator. Install it with the commands:

    cd LCD-show/

    sudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.deb

    Click the Menu (Raspberry Pi Logo) button on the task bar, choose Preference -> Calibrate Touchscreen.

    Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.

    You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists).


    For detailed steps, please visit this page.

    Hi, is possible to have a mirror screen, both the 3.5 screen HDMI working? as below manufacture, checking for support from the manufacturer if any, thanks. ( Al Kathiri Khalid , 25/01/2021 )
    Hi, for technical inquiry, you may drop an email to and our technical team will assist on your issue. Thanks :)
    Can 3.5inch RPI LCD (A) V3 connected to RPI 4 , is there a driver to update for Pi4 (4G)? TQ ( Tan Yock Pon , 31/10/2020 )
    Hi, yes can. It comes with driver ya. Thanks :)
    Is this work on arduino? ( Mashiro, 21/11/2019 )
    Hi, we're sorry as the header pin for this product is designed for Raspberry Pi. Thanks :)
    Is it compatible with Pi 4? ( Virat Jiarapakdee , 09/08/2019 )
    Hi, this item is compatible with Raspberry Pi 4
    I am unable to install the Drivers , Please guide me how to do

    ( Janarthanan, 02/06/2019 )
    Hi, please post this question on our forum as here is for short inquires only.
    When will this restock? ( Vento, 15/10/2018 )
    Hi, this item will available in 3-4 weeks
    Does it work with Kali Linux? ( Jay, 28/09/2018 )
    Hi sorry, we are sure about that but this item Adapt for the Raspbian system.
    is the stylus in the picture included ( Abdul Rahim, 31/05/2018 )
    Hi, yes it is included. Thanks.
    The backlight is led. Mercury Free? ( Tariq Abhar, 22/03/2018 )
    Hi, yes the backlight is LED. However we don't have any information regarding chemical involved from the supplier. Thanks.
    is this suitable for raspberry pi zero W? ( Hasmilazlan, 25/01/2018 )
    Hi, this item can work with Raspberry PI Zero W. Thanks

    Ask a question

    Note: HTML is not translated!
    • 4.9 out of 5
    Total Reviews (79)
    • 5
    • 4
    • 3
    • 2
    • 1

    Tags: TFT Screen, Raspberry Pi Screen, 3.5" Screen