Description: This is a fantastically easy-to-use MaxBotix ultrasonic range finder. We are extremely pleased with the size, quality, and ease of use of this little range finder. The serial interface is a bit odd (it's RS232 instead of standard TTL), but the PWM and Analog interfaces will allow any micro to listen easily enough. The sensor provides very accurate readings of 0 to 255 inches (0 to 6.45m) in 1 inch increments with little or no dead zone!
Maxbotix is offering the EZ0, EZ1, EZ2, EZ3, and EZ4 with progressively narrower beam angles allowing the sensor to match the application. Please see beam width explanation below.
Control up to 10 sensors with only two pins! Checkout the Maxbotix FAQ.
Features:
42kHz Ultrasonic sensor
Operates from 2.5-5.5V
Low 2mA supply current
20Hz reading rate
RS232 Serial Output - 9600bps
Analog Output - 10mV/inch
PWM Output - 147uS/inch
Small, light weight module
Specific model: MD1010
Example of application with SK40C can be refer to SK40C tutorial page, project 6 is showing all the method to read and use this sensor, interface and sample code can be use.
Warranty Period: 12 months
Resources
Fast Test - Using multimeter and 5V supply to test whether the ultrasonic is working