We still deliver orders as usual during 'circuit breaker' period. Order Online, Digital Making at Home, Stay Safe! 💪💪
3-Axis Accelerometer

3-Axis Accelerometer

  • Brand: Cytron
  • Product Code: SN-ADXL335-CY
  • Availability:
    89
  • Warranty Period: 12 months
  • Shipping:
  • Login to view ProMaker's Insider Price!
  • S$13.21
  • Ex Tax: S$13.21
  • Price in reward points: 1480
  • 10 or more S$12.14
  • 30 or more S$10.57
  • Cashback: S$0.40
  • CytronCash Balance: Login
This is the new breakout board for the famous and mature 3 axis ADXL335 from Analog Devices. It is the latest in a long, proven line of analog sensors - accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely low noise and power consumption - only 320uA! The sensor has a full sensing range of +/-3g.

The breakout board comes with on-board 3.3V voltage regulator, therefore it supports voltage range from 2.5V to 6V.

Board comes fully assembled and tested with external components installed. The included 0.1uF capacitors set the bandwidth of each axis to 50Hz.

Features:
  • On-board 3.3V voltage regulator
  • Operating Voltage: 2.5V - 6.0V
  • Typical Current: 300 μA
  • Range: ±3g
  • 3-axis sensing
  • Bandwidth adjustment with a single capacitor per axis
Document:
Tutorials:


   

Write a review

Please login or register to review
Hi, can i connect your accelerometer with my PLC? because i just want it triggered when my toy is moving. ( Yong Hao, 05/03/2020 )
Hi, you may drop an email to support@cytron.io for technical assistance. Thanks :)
Hi, I already bought the circuit and would like to measure the output voltage for each axis using Arduino Uno. Since this circuit has 3.3V voltage regulator and I supplied it with 5V, what should I do so I can measure the voltage value accurately? ( Tee, 03/04/2019 )

Hi, for the accelerometer you can read the data at Arduino UNO but you have to process the input to make it 5V with an additional circuit. For more info please post on our forum.


Can i ask is this the 3-Axis Accelerometer solder with the pin connector? ( Jack, 04/04/2018 )
Hi, no it is not soldered. Thanks.
Hi, I ordered an accelerometer. When testing, the analog output for z-axis is same for +1g and -1g direction. Is it normal? ( Goh Kean Sheng, 22/03/2018 )
Hi, you can share a few clear photos/videos on your hardware at our technical forum. Then we will further discuss there as this session only for short inquiry, thanks. :)
datasheet download return 404 page. need to register at luminpdf?
( vincent wong, 08/08/2017 )
Hi, thanks for your feedback. We already fix the link. You can download the file already. Thanks again for your feedback :)
Hi, i would like to access to the tutorials linked at the description. but i was unable to. it says that : Your access to this site has been limited Your access to this service has been temporarily limited. Please try again in a few minutes. (HTTP response code 503) Reason: Blocked by login security setting. ( Xin Yi, 04/06/2016 )

Hi, we have tried the link from the product page, here is the link: http://tutorial.cytron.com.my/2014/09/15/accelerometer-adxl335-fast-test-and-angle-test/ is working fine. It might be your IP is being blocked by our server. Is there any option to clear the block? Please do send your reply to support@cytron.com.my, we would like to help. Alternatively, you can try using another computer to access the link.

Hi, I would like to know whether this 3-axis accelerometer gyroscope is compatible with arduino uno R3? Is it able to be used to construct a self-balancing robot? ( Ryan, 11/12/2015 )

Hi, Yes it is compatible with Arduino Uno and possible to be used to construct self-balancing robot. For further inquiry, please kindly visit our technical forum as this session is only for short inquiry. Thanks. :)

What is the dimension of this board? ( Khoo Boon How, 04/12/2015 )

Hi. The dimension is 2 cm x 2.3 cm. Thanks. :)

Hello, may i know that what is the different between the 3-axis accelerometer and also the triple axis accelerometer breakout? If i wan to detect a fall of the elderly then which is more suitable to use? I will use this together with the arduino mega. ( Lim Hok Hong, 26/10/2015 )

Hi, The function for both sensor are the same because they are using same IC. The difference is input voltage for 3-Axis Accelerometer is 2.5V-6.0V while triple axis accelerometer breakout board is 1.6V - 3.6V. Another difference is  triple axis accelerometer breakout board are from Sparkfun and the other one is made by Cytron. Thanks. :)

I would like to use this 3-Axis Accelerometer and implant it into a toy car. Can I use this sensor to measure the car acceleration and deceleration with the Arduino Uno? ( NG KEN HOE, 01/10/2015 )

Hi. Yes, you can. Thanks :) 

Ask a question

Note: HTML is not translated!
DescriptionDate AddedSizeAction
Schematic21/05/2020N/ADownload
ADXL335 Datasheet21/05/2020N/ADownload
  • 4.7 out of 5
                  
Total Reviews (7)
  • 5
    85.71%
  • 4
    0%
  • 3
    14.29%
  • 2
    0%
  • 1
    0%

Tags: SN-ADXL335-CY, 3-Axis Accelerometer, Sensor, Accelerometer / Gyro / IMU 3-axis, accelerometer, gyro, imu, sn-adxl335-cy