This is a portable Total Dissolved Solid (TDS) and Electrical Conductivity (EC). It is a device designed to measure the density of liquids, conductivity, and temperature. Very useful in aquariums, pharmacies, cosmetics, medical plants, analytical laboratories, etc. It is also useful for Hydroponic and Aquaponic. The use of microprocessor technology allows very high precision measurements.
How to use:
Hold function:
The meter will lock the measurement result when the HOLD button is pressed.
The measurement will be automatically locked without pressing any key within 5 minutes.
Auto shut-off function
It will automatically shut off to save battery after 5 minutes of inactivity.
Automatic temperature compensation:
The instrument with automatic temperature compensation function under measurement mode.
Mode shift:
When SHIFT button is pressed, the instrument will shift between the following display modes:
Maintenance:
Keep the electrode clean, cover the electrode protective sleeve.
Please take out the batteries for long periods idle.
Note: Dip only the electrode part in the solution. Do not submerge the whole TDS&EC meter into the test solution to avoid spoiling the circuit board.
Warranty Period: 12 months
Features
Digital TDS meter tester to test the filter water quality purity, to check the performance of your water filter, to check for hardness (1 grain=17ppm)
Turns off meter after 5 minutes of non-use to conserve batteries.
International
Singapore
Malaysia
Thailand
Vietnam
