Pneumatic fittings are parts used to connect sections of pipe, tube, and hose in pneumatic (pressurized gas) systems. Compared to hydraulic fittings, pneumatic fittings are typically characterized by tighter seals and lower pressure requirements. They are frequently used in pneumatic logic control systems and instrumentation. Here is a video showing the push-in fit feature:
Pneumatic Y Push In Fit is widely used in pneumatic circuit. All three fitting is push in fit and easily provides secure and air-tied holding of the PU tube and hose. Yet, offering ease of removing the tube too.
Easily branch out your air line into two opposite directions. External tightening with a flat wrench. Push-to-connect fittings have ends that are designed to accept tubing by pushing it into the end.
How to use? Simple installation push the tubing, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. These connections are convenient for sections of the system requiring frequent disconnection and reconnection.
- Model Number: PY6
- Type: Fitting
- Three push-to-connect fitting
- Fit For Tube Outer Diameter: 6mm
- Fluid Type: Air, Vacuum, Water (no freezing)
- Working Pressure: 0-1.0 MPa or 0-15 0psi
- Working Temperature Range: 0-60°C
- Applicable Tube: Polyurethane or Nylon
- 1 x PY6 Pneumatic Union 6mm Y Host Push In Fitting