Breadboard Power Module MD-102

Breadboard or Protoboard is very useful for electronics prototyping, but when it comes to getting power source, it is a headache because most of power source does not plug directly onto breadboard. No worry, we have the solution, this is the power module for breadboard. A power supply module suitable for all MB102 range breadboard use (400 tie holes or 830 tie holes) with onboard voltage regulator providing output voltage of 5V or 3.3 V selected individually by the onboard jumper switch. 

Noted: DC Barrel Jack input terminal must be supplied with voltage >6.5V. Voltage lower than 6.5V will produce lower voltage at 5V output and 3.3V output.

• Input Voltage: 6.5 to 12V DC at DC barrel jack terminal or USB (5V)
• Output voltage: 5V or 3.3 V DC 
• Maximum output current: <700mA
• LDO: AMS1117-5.0 (5VDC) & AMS1117-3.3 (3.3VDC)
• Size: 5.3x3.2x2.5cm
• Compatible: 3.3V or 5VDC
• Output Pins: 2 pairs of 3.3V & 5V DC, configureable using mini jumper
• Come with USB A type socket
• Push latch button as ON/OFF switch
• Power indicator LED
• Reserve Polarity Protection at DC Barrel Jack terminal
• Compatible with narrow type of breadboard: (MD-102)
  • 8.5x5.5cm(400 Holes)
  • 16.5x5.5cm (830 Holes)

• 1 x Breadboard Power Module MD-102