Cytron Reconfigurable Line Following Track

Looking for a customizable track for your line following robots?

Bored letting your robots running on the same old line following track that you have?

Looking for a suitable line following track for competitions or robotics club activities?

Tired of attaching, removing and readjusting the electrical tapes on the floor to customize your own track? Not forgetting the frustration to clean up the sticky residue left on the surface!

Here’s a GOOD NEWS for you! Introducing the Cytron Reconfigurable Line Following Track. Join the tiles together and your robots are ready to GO!

There are 3 type of tiles with different black line patterns printed on the white non-reflective EVA foam.

We offer 5 different sets, each with a different combination of tiles. Combo 8 is recommeded to everyone for a start. With 1x Cross tile, 4x Curve tile and 3x Straight tile, this set can be customized into various open or closed loop track designs.

 

Besides, there are also Combo 16, Cross 8, Curve 8 and Straight 8 sets available. You may refer to the packing list below for the content of each set.

 

Material: EVA form, no lamination layer

Hardness: 40 degree (+/- 5)

Size: 315mm x 315mm

Thickness: 10mm

Black Line Width: 18mm

There are five options available as shown below. So what's included depends on your selection.

Each set comes with an info sheet that shows some of the track designs that you may start with.