There are no products to list in this category.
Note: MakerDisk MicroSD cards (128GB, 64GB, 32GB) shipped from 11 Nov 2021 onwards are loaded with the latest Raspberry Pi OS - Bullseye (release date: 30th October 2021)..
S$18.00++ Ex Tax: S$18.00
If you are new to Raspberry Pi, please visit our Raspberry Pi Page for Beginner.Raspberry Pi is a single-board computer :) In layman terms, it is a computer mothe..
S$41.07 S$40.04 Ex Tax: S$40.04
Searching for suitable USB cable to connect to Cytron UNO, Maker UNO, NodeMCU, micro:bit or Raspberry Pi Zero? Yup, you can get it here.This is USB 2.0 type A to micr..
S$2.50 Ex Tax: S$2.50
Note: From 21st October 2020 onwards, 16GB microSD is from the SanDisk brand.Note: There are two brands for this microSD card, Panasonic and SanDisk. Both are from th..
S$17.50 S$17.00 Ex Tax: S$17.00
Note: Stock from 28th September 2022 onwards are Cytron brand. This cooling fan with two wire connector interfaces for dual speed mode (3.3V and 5V DC) is suitabl..
S$3.20 Ex Tax: S$3.20
Note: There are two brands for this microSD card, Panasonic and SanDisk. Both are from the Raspberry Pi Foundation.This is 32GB, Class A1 micro SD card. Preloaded w..
S$21.07 Ex Tax: S$21.07
This FFC ribbon cable is mainly for connection between Raspberry Pi and its camera module. It has 15 ways with 1mm pitch and fully compatible with the Raspberry Pi camera..
S$3.89 Ex Tax: S$3.89
This FFC ribbon cable is mainly for connection between Raspberry Pi and its camera module. It has 15 ways with 1mm pitch and fully compatible with the Raspberry Pi camera..
S$2.46 Ex Tax: S$2.46
This is the perfect extension for Raspberry Pi's GPIO to breadboard, with clear GPIO labeling. This is the assembled version of the Pi T-Cobbler. It works with the:..
S$5.36 Ex Tax: S$5.36
We know Raspberry Pi is a single board computer, aiming to promote computer engineering and programming. It is very compact and is a fully functioning computer motherboar..
S$5.00 Ex Tax: S$5.00
Now look at this cutest little microSD card reader/writer - but don't be fooled by its compact size! It's wicked fast and supports up to 128 GB SDHC cards! Simply slide t..
S$1.43 Ex Tax: S$1.43
All electronics part will dissipate heat when electron go through it. Normally we will notice this on high power MOSFET and linear voltage regulator, and do not forget th..
S$1.79 Ex Tax: S$1.79
Note: Check out the review of Maker Hat Base by the MagPi: REVIEW: Maker HAT Base for Raspberry Pi 400 — The MagPi magazine Maker Hat Base extends out ..
S$15.57 Ex Tax: S$15.57
Note: This logic level shifter breakout comes pre-soldered with headers. If you have ever tried to connect a 3.3V device to a 5V system, you know what a challen..
S$0.89 Ex Tax: S$0.89
This is a heatsink with a cooling fan, customized for Raspberry Pi 3 Model B, B+ and also Raspberry Pi 4 Model B.As we understand, Raspberry Pi boards deliver great p..
S$6.61 Ex Tax: S$6.61
Standoff is needed as a spacer and also a mounting pole for PCBs. This is Nylon PCB stands kit with a thread size of 2.5mm. All PCB mounting holes of Raspberry Pi mainboa..
S$10.00 Ex Tax: S$10.00
Hey, looking for a portable and convenient USB microphone? It's the new mini USB microphone, just plug and play the mini USB with any computer or laptop and etc without t..
S$5.32 Ex Tax: S$5.32
This is 64GB, Class A1 micro SD card. Preloaded with NOOBS (New Out Of Box Software), and we are taking it directly from Raspberry Pi Foundation. Yes, all the way from th..
S$30.00 Ex Tax: S$30.00
Note: From 26 Apr 2021 onwards, the connectors of this extension cable are changed from black to gray. This 10cm long ribbon cable has a 40-way male and a female h..
S$3.39 Ex Tax: S$3.39
This FFC ribbon cable is mainly for connection between Raspberry Pi and its camera module. It has 15 ways with 1mm pitch and fully compatible with the Raspberry Pi camera..
S$5.68 Ex Tax: S$5.68