Industrial 8-Channel Relay Module for Raspberry Pi Pico

Note: This relay module comes WITHOUT a Raspberry Pico. If you do not have one, please buy either a:

• Raspberry Pi Pico H, pre-soldered with headers
• Raspberry Pi Pico WH, wireless and pre-soldered with headers

Industrial 8-Channel Relay Module for Raspberry Pi Pico/W

This multi-purpose 8-channel relay module allows you to control output devices such as solenoid valves, motors, tower lights, and more. It is designed to be powered by a Raspberry Pi Pico or Pico W, but we do not include it with the module in case you already have one. If you do not have a Raspberry Pi Pico, you can choose either a Pico or Pico Wireless.

The Carrier board comes with embedded protections: Power Supply Isolation & Photocoupler isolation.

Carrier Board Layout:

Comes with ABS Enclosure:

The Carrier Board also has an ABS Case/Enclosure with DIN Rail Mounting at the back. Easy to install and safe to use!

• Onboard unibody power supply isolation provides stable, isolated voltage, eliminating the need for an extra power supply for the isolated terminal.
• Onboard photocoupler isolation prevents interference from external high-voltage circuits connected to the relay.
• High-quality relay with a contact rating of 10A 250V AC or ≤10A 30V DC.
• ABS protection enclosure with rail-mount support for easy installation and safe use.
• The Breakout USB port and BOOT pin make it easy to debug without disassembling the enclosure.
• PWR indicator, RGB LED, and passive buzzer are located outside the enclosure.
• Comes with development resources and a manual (including Raspberry Pi Pico C/C++ and MicroPython examples).

Specification:

Dimension:

• 1 x ABS Protection Enclosure (Top cover and base)
• 1 x 8-Channel Relay Carrier Board for Raspberry Pi Pico/W
• 1 x Small screwdriver
• 1 x Screws pack

• Pico Relay (B) Wiki Page, by Waveshare