30Amp 5V-30V DC Motor Driver

S$50.00
Cashback: S$1.50
  • 5 or more S$47.50
  • 20 or more S$45.00
  • 50 or more S$42.50
  • Availability: 401

    Buy locally from a partner

    Country:
    Description
    Note: MD30C is Revision 2.0 since January 2016.
     
    We know DC brushed motor is widely used for many different applications; from conveyor, AGV (Automated Guide Vehicle), mobile robot and combat robot. One of the reasons is the ease to use it, just connect the two terminals of motor to power respectively, it will start rotating, so simple. Yet, to control the speed and direction from a controller, a motor driver is needed.
    This is MD30C DC brushed motor driver. It is the successor of MD30B which is designed to drive medium to high power brushed DC motor with output current up to 80A peak (1 second) and 30A continuously. Full NMOS(solid state) design not only provides faster switching time, it is also more efficient and no heatsink or fan is required to get 30A continuous in room temperature.
     
    Besides that, MD30C also incorporates some user friendly features such as reverse polarity protection for Vin/Vmotor and onboard PWM generator which allows it to operate without additional controller. The motor can simply be controlled with the onboard switches and potentiometer. External switches and potentiometer can also be used.
     
    Which motor is good to be driven by MD30C? As long as the motor:
    • DC Brushed motor (Two terminals)
    • Operating voltage from 5V to 30VDC
    • Rated Current ≤ 30A
    • Peak Current ≤ 80A

    Example of suitable DC brush motor with MD10C (Not limit to):

    Warranty Period: 12 months
    Features
    • Bi-directional control for 1 brushed DC motor, single channel
    • Motor Voltage: 5V to 30VDC
    • Maximum Output Current: 80A peak (1 second), 30A continuous
    • Reverse polarity protection for Vmotor
    • 3.3V and 5V logic level input, compatible with:
    • Full NMOS H-Bridge for higher efficiency and no heat sink is required
    • Regenerative Braking
    • Brakes the motor when PWM pin is low (logic low)
    • Speed control PWM frequency up to 20KHz (Actual output frequency is same as input frequency when external PWM is selected)
    • Onboard PWM generator with switches and potentiometer for standalone operation
    • Support both locked-antiphase and sign-magnitude for external PWM operation. Note: PWM is not "RC PWM"
    Dimension: ~94mm x ~79mm
    Specifications
    Operating Condition
    Motor Channel1
    Operating Voltage (VDC)5 to 25 (Rev 1.0) , 5 to 30 (Rev 2.0 )
    Peak Current (A)80 (1 seconds)
    Continuous Current (A)30
    Operating Modes
    Arduino ShieldNo- can be used with Wire connection
    PWM (Lock-Antiphase and Sign-Magnitude)Yes
    UARTNo
    AnalogNo
    RC Servo SignalNo
    Special Protection
    Polarity ProtectionYes
    Appearance
    LEDs IndicatorYes
    Test/Manual ButtonYes
    Cooling FanNO
    Other Features
    others3.3 and 5V compatible input
    Speed ControlOn board Speed control
    Q & A (43)

    Ask a question

    Reviews
    • 5 out of 5
                    
    • 5
      98.25%
    • 4
      0%
    • 3
      1.75%
    • 2
      0%
    • 1
      0%
    Sort By:

    Tags: MD30C, 30A DC Motor Driver, Robot Controller, DC Motor Driver, 120W DC Brush Motor 30a, motor, driver, md30c, H-Bridge, Solar Tracker, Rover