Arduino UNO R3 Compatible (CH340) Beginner Kit

S$34.46
Cashback: S$1.03
  • 10 or more S$31.68
  • 25 or more S$29.29
  • Availability: 84

    Buy locally from a partner

    Country:
    Description

    This kit includes an Arduino UNO compatible board, UNO R3 Compatible with CH340. Since most shields and libraries are based on UNO, it's the ideal board for learning the Arduino ecosystem. It's fully compatible with the original Arduino UNO R3 (except for the USB to UART chip - CH340), making all shields and example sketches for Arduino UNO R3 applicable to this board.

     

    Now, with this comprehensive beginner kit which includes the famous UNO R3 compatible as the main controller. All the applications and projects you want can be done with this set. This kit is suitable for:

    • Engineering students: This kit covers essential topics like controllers, electronics, sensors, actuators, and programming, making it ideal for all engineering courses—Electronics, Mechanical, or even Civil Engineering.
    • Teachers: Perfect for student-teacher projects, especially in RBT (Reka Bentuk Teknologi).
    • Electronic enthusiasts: Kickstart your next project by utilizing all the components in this comprehensive kit.
    • Robot Builders: All sensors and actuators in this kit are suitable for robotics.
    • Software Engineers: Arduino serves as an excellent platform for establishing interfaces on the computer, facilitating data reception from the outside world and communication applications.

     

    Warranty Period: 12 months
    Features
    • Comes with UNO R3 Compatible (CH340) board
    • Pack in a two layers plastic case, suitable for long usage and tidy storage
    • Includes various types of sensors, and actuators (motors, LEDs, buzzers)
    • Perfect for learning Arduino ecosystem, electronics, and programming
    • You only need a computer to get started
    • Power everything from your USB port which is needed for program loading in any case.
    • Can support various electronics projects and topics.
    Packing List
    • 1 x UNO R3 CH340 (Arduino UNO R3 compatible) board
    • 1 x USB Type B Cable (30cm length)
    • 30 x Jumper Cable Male to Male
    • 10 x Jumper Cable Male to Female
    • 1 x Large Size Breadboard, 830 holes
    • 1 x Four segments 7-Segment Display
    • 1 x Single 7-Segment Display
    • 1 x 8x8 Dot Matrix Module
    • 1 x Parallel LCD 16x2 Character
    • 1 x UNL2003 Driver Board
    • 1 x 28BJJ Unipolar Stepper Motor
    • 5 x 5mm Red LED
    • 5 x 5mm Green LED
    • 5 x 5mm Yellow LED
    • 1 x SG90 Servo Motor
    • 1 x 9V Battery Clip Arduino Compatible
    • 5 x 220R Resistor
    • 5 x 10K Resistor
    • 5 x 1K Resistor
    • 1 x 10K Potentiometer/Variable Resistor
    • 1 x Male Header 1x40 ways (to solder 2x16 Character LCD)
    • 1 x Active Buzzer
    • 1 x Passive Buzzer
    • 1 x 4x4 Key Button
    • 4 x Yellow Cap Push Button
    • 1 x LM35 Temperature Sensor
    • 1 x Tilt Sensor
    • 1 x Flame Sensor
    • 1 x Water Sensor
    • 3 x 5mm LDR
    • 1 x RGB LED Module
    • 1 x Infrared Remote Control Receiver
    • 1 x IR Remote (battery CR2025 is included)
    • 1 x 74HC595N IC, Serial to Parallel IC for Output pin expansion
    • 1 x RFID RC522 Mifare Module
    • 1 x RFID Mifare Keychain
    • 1 x RFID Mifare Card
    • 1 x Joystick Module
    • 1 x Sound Module
    • 1 x Relay Module
    • 1 x 9V Battery Snap to DC Barrel Jack (9V battery is NOT included)
    • 1 x RTC Module (coin cell battery is included)

     

    Resources
    Q & A (8)

    Ask a question

    Reviews
    • 4.9 out of 5
                    
    • 5
      94%
    • 4
      3%
    • 3
      2%
    • 2
      1%
    • 1
      0%
    Sort By:

    Tags: UNO compatible, CH340, Getting Started, Sensor kit, Remote Control, Arduino UNO R3 compatible